航站楼旅客满意度与空间关系解析

为研究航站楼室内空间与旅客满意度之间的关系,本文以中国不同气候区的9个城市的11座航站楼为研究对象,利用后评估方法,将2014年至2016年得到的4 149份旅客满意度调查问卷与室内客观环境参数进行了对比研究,尤其包括了不同航站楼的面积以及各功能区的平均高度与旅客满意度进行的,并结合主客观测试结果展开综合分析.研究结果表明,旅客对于航站楼室内空间的满意度在79％～85％,但空间感受在旅客最关心的13个因素排序上排名倒数第4,其中高度与面积两项结果与航站楼旅客满意度之间的相关因子分别为0.57与0.675.结果显示:1)旅客并不觉得大面积的航站楼室内需要高大空间,为此建议在设计前期应该根据能耗与声场来决定层高;2)航站楼室内空间高度与能耗直接相关,设计中应降低空间高度节省能耗.     

Evaluating the commercial airliner cabin environment with different air distribution systems

Ventilation systems for commercial airliner cabins are important in reducing contaminant transport and maintaining thermal comfort. To evaluate the performance of a personalized displacement ventilation system, a conventional displacement ventilation system, and a mixing ventilation system, this study first used the Wells‐Riley equation integrated with CFD to obtain the SARS quanta value based on a specific SARS outbreak on a flight. This investigation then compared the three ventilation systems in a seven‐row section of a fully occupied, economy‐class cabin in Boeing 737 and Boeing 767 airplanes. The SARS quanta generation rate obtained for the index patient could be used in future studies. For all the assumed source locations, the passengers’ infection risk by air in the two planes was the highest with the mixing ventilation system, while the conventional displacement ventilation system produced the lowest risk. The personalized ventilation system performed the best in maintaining cabin thermal comfort and can also reduce the infection risk. This system is recommended for airplane cabins.     

Assessment of the gluten toxicity of wheat and naan in Xinjiang Uyghur Autonomous Region,China

Xinjiang is a high-risk area for celiac disease (CD) regardless of genetic or environmental factors. However, no case has been reported yet in people living in Xinjiang. This study aims to explore the potential connection between diet and occurrence of CD in the Xinjiang population. To this end, the levels of T-cell stimulatory epitopes in 164 accessions of Xinjiang wheat were tested by using Western blot with monoclonal antibodies against α-gliadin epitopes Glia-α9 and Glia-α20. Three wheat varieties with remarkably low amounts of T-cell stimulatory epitopes were obtained. Western blot and R5 competitive ELISA were performed for the assessment of potential toxicity related to CD of naan. Results showed a reduction of gluten toxicity after wheat flour was processed into naan, suggesting it may have the potential to help to reduce the risk of CD for the genetically predisposed individuals.     

Microscale investigation into mechanical behaviors of heat-bonded nonwoven geotextile using DEM

Heat-bonded nonwoven geotextiles (HBNGs) made from synthetic fibers are widely used in engineering practices. One of the challenges on the way is to link the properties of fibers and the fabric's microstructure to the deformation and failure mechanisms of HBNGs. In this study, a random distribution geometry method was developed to reproduce the complex fibrous structure of HBNG. A piecewise linear model was adopted to reproduce the nonlinear stress-strain relationships of single fibers. The present method has been successfully applied in the simulation of uniaxial and biaxial tensile tests and puncture test. The orientation distribution of fibers and the mechanical behaviors (e.g., deformation, strain localization, force-strain relationship) of HBNG specimen were reasonably simulated. Specifically, the hourglass shape during uniaxial tensile test, the axisymmetric deformation pattern during biaxial tensile test and the trumpet shape during puncture test were all well reproduced. The present method provides an applicable tool to study the complicated mechanical behaviors of HBNG and is also helpful to obtain a better understanding of its deformation and failure mechanisms.     

Valorisation of protein hydrolysates from animal by-products: perspectives on bitter taste and debittering methods: a review

Conversion of animal by-products to high value-added food ingredients is one of the top trends in the slaughter industry. Enzymatic hydrolysis of animal by-products can generate protein hydrolysates, which provides an opportunity for effective utilisation. However, bitterness of protein hydrolysate is a major undesirable aspect for various applications. In this review, the current knowledge on protein hydrolysates from animal by-products is briefly reviewed. The structural features of bitter peptides and bitter taste receptors are summarised. Moreover, the potential approaches for debittering protein hydrolysates are highlighted, including exopeptidase treatment, Maillard reaction, plastein reaction and encapsulation. In addition, the current debittering strategies and challenges are also discussed. This article presents some opportunities to utilise protein hydrolysates from animal by-products and their debittering methods.     

Reaction synthesis of spark plasma sintered MoSi2-B4C coatings for oxidation protection of Nb alloy

MoSi₂-B₄C coatings with different B₄C contents were prepared on Nb alloy by spark plasma sintering (SPS) process. Powder mixtures of Mo, Si and B₄C were used as the coating starting materials. Besides MoSi₂ and B₄C phases, small amounts of SiC and MoB are also found in the coatings because of the reactions of Mo, Si and B₄C powders during sintering. Compared with single MoSi₂ coating, the MoSi₂-B₄C coatings show better oxidation resistance at 1450?℃, and dense B₂O₃-SiO₂ oxide scales form after 100?h oxidation. The B₄C or MoB in the MoSi₂-B₄C coatings can serve as the B donor for the formation of B₂O₃. A slight degradation in the microstructure of the MoSi₂-B₄C coatings after oxidation is observed, which can be attributed to the presence of an NbB layer in the inter-diffusion zone of the coatings that retards the inward diffusion of Si from the coating into the substrate alloy. The microstructure development and oxidation behavior of the MoSi₂-B₄C coatings have been discussed.     

Characterization of the Chemical Composition of Chinese Moringa oleifera Seed Oil

This work focused on physicochemical property assaying, fatty acid composition, triacylglycerol (TAG) profiles, and unsaponifiable matter composition of the Chinese Moringa oleifera seed oil. The results indicated that there was no significant difference in approximate nutritional components between M. oleifera seeds from China and India, while variations in the mineral element contents are significant. Both the Soxhlet extraction method and the aqueous enzymatic extraction method were adopted to extract oil from Chinese M. oleifera seeds. Oil yield obtained using the Soxhlet extraction method was higher than that obtained using the aqueous enzymatic extraction method. While both the iodine value and unsaponifiable matter content of the aqueous enzymatic extracted oil were a little higher than that of the Soxhlet extracted oil. Both oils possess a very low acid value and peroxide value, suggesting their good quality as edible oil. Fatty acid composition results indicated that this oil was especially high in oleic acid. Characterization of the TAG composition was achieved by a two-dimensional high-performance liquid chromatography (HPLC) coupling of nonaqueous reverse-phase and silver ion HPLC with the atmospheric pressure chemical ionization mass spectrometry method. A total of 22 TAG including 16 regioisomers were determined. Composition results of unsaponifiable matters revealed that this oil possesses a number of phytosterols, in which β-sitosterol and stigmasterol are most predominant.     

Functional chemical modification of a porcine acellular dermal matrix with a modified naturally derived polysaccharide crosslinker

Antibacterial and physicochemical properties are generally considered important features of the porcine acellular dermal matrix (pADM). Oxidized 2-hydroxypropyltrimethyl ammonium chloride chitosan (OHTCC) was applied to crosslink with pADM at dosages of 1, 2, 4, 8, and 16%. The properties of the crosslinked pADM (OHTCC-pADM) were evaluated. DSC and TG analysis suggested that crosslinking could promote the thermal stability, the highest T_d, and T_max of OHTCC-pADM (8%) was 80 °C and 325 °C, which has been improved by 15 °C and 13 °C, respectively. While FTIR and AFM tests indicated that the structure integrity of collagen could still be maintained. SEM tests demonstrated the sustained three-dimensional architecture of OHTCC-pADM with appropriate porosity. Moreover, OHTCC-pADM exhibited improved ability to resist collagenase degradation, the degradation rate of 4%-, 8%-OHTCC-pADM was <50%. The tensile strength of OHTCC-pADM proved to be superior compared to pADM. Furthermore, 8%-OHTCC-pADM exhibited nearly 90% antibacterial activity against Escherichia coli, and Staphylococcus aureus. In addition, the results of the 3-(4,5-dimethylthiazol-2yl)-2,5-diphenyltetrazoliumbromide study showed that the cytocompatibility of OHTCC-pADM decreased with the increasing the amount of OHTCC, but all relative proliferation rates were above 80%. In conclusion, our study revealed that OHTCC stabilized and functionalized pADM while preserving good cytocompatibility. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47633.     

Hydrolysis-resistant polyurethane elastomers synthesized from hydrophobic bio-based polyfarnesene diol

Hydrolytic stability is an essential requirement for polyurethanes (PUs) that are used in highly humid and aqueous environments. In this study, hydrolysis-resistant PU elastomers (PUEs) are synthesized based on hydrophobic bio-based polyfarnesene diol (PFD), which contains unique “bottle brushes” structure (with long branched hydrocarbon side chains). The effect of hard segment (HS) content, ranging from 30 to 50%, on the morphology and properties of PUEs is investigated by Fourier transform infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry, X-ray diffraction, scanning electron microscopy, tensile, water absorption, and contact angle measurements. The results show that there are prominent phase separations in the synthesized PUEs. The PUEs show a three-stage degradation process and two T_g, one is at about −66 °C and the other 61 °C, which are related to the soft segment and HS, respectively. Water contact angles of PUEs increase from 98.6 to 105.2° with the increasing of PFD structural unit fraction. After being immersed in deionized water for 30 days, PUEs show no significant degradation of both tensile strength and elongation at break, and mass changes of all samples are less than 0.5%. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47673.     

随机森林算法在温度分布重建中的应用

为提高温度分布重建精度,提出了使用随机森林算法对温度测点进行优化布置的新方法。 将测点位置作为样本特征, 以不同的测点布置方式及其对应的重建误差作为样本数据集。 使用样本数据集构建随机森林模型,评估样本特征重要性,根据 特征重要性排序实现温度测点的优化布置。 设定仿真实验与燃烧实验验证优化布置算法的可行性与有效性。 分析实验数据, 所提出的优化布置算法相对于原有算法,重建精度提升了 20%以上。 研究结果表明,随机森林算法在温度分布重建中具有良好 的应用价值,并为解决工业实际问题提供了新思路。